CC 92 picks V1 C1 V2 C2 V3 C3, CC 31 switches the upper manual, CC 30 the lower one. The pedal and the percussion never go through the scanner.
CC 11. With the percussion on and not soft, the whole sound is 4.4 dB quieter, as in setBfree.
CC 65 switches it on, CC 93 sets the drive (0 to 16, as KNOB 3 on the FM-1): setBfree's overdrive.inputgain in steps of 1.5 dB, 12 is its default. The output follows the drive, so on and off are about equally loud.
The character is setBfree's overdrive.character (0 to 127, 16 in firmware 0.4): it sets the two bass filters around the tube curve. It goes as NRPN 1/0 (CC 99 = 1, CC 98 = 0, CC 6 = value) and needs firmware 0.5. The output is matched to character 16: other values can be louder or quieter (in setBfree too: about −17 dB at 32, +6 dB at 127); the limiter keeps the peaks in.
CC 1 selects slow, stop or fast; CC 64 (sustain pedal) toggles slow and fast.
setBfree's whirl.horn/drum.slowrpm, fastrpm, acceleration and deceleration (the time to get about two thirds of the way to the new speed). They go as NRPN 2/0 to 2/7 with 14 bits (CC 99 = 2, CC 98 = 0..7, CC 6 and CC 38: 0.1 rpm, or ms) and need firmware 0.5. The FM-1 keeps them with its settings, for all programs.
setBfree's osc.tuning: the pitch of A, 430 to 450 Hz in steps of 1 Hz; all wheels follow (the gears stay). NRPN 3/0 with 14 bits (CC 99 = 3, CC 98 = 0, CC 6 and CC 38: 0.1 Hz, the FM-1 rounds to whole Hz), firmware 0.5. Kept with the settings.
setBfree's osc.attack.click.level: how deep the short burst goes when a key closes (0 to 100 %, setBfree's 0.5 = 50 %). NRPN 3/1 with 14 bits (CC 6 and CC 38: 0.1 %), firmware 0.5. Kept with the settings.
CC 91, setBfree's reverb.mix. The steps double, like the knob on the FM-1; the first ones are fine.
Reads your own programs 112 to 127 and the settings of the extended parameters (overdrive character, Leslie speeds and times, tuning, key click) from the FM-1 and saves them as a file on this computer.
Puts a backup file back onto the FM-1 (this one or another): programs 112 to 127 become exactly those in the file (a program that is empty in the file is deleted on the FM-1), and the extended parameters take the file's values.
Orange: sent by the editor. Green: arrives from the FM-1 or a keyboard on the selected input. With firmware 0.5 the editor reads the FM-1's sound when you connect and when you press Read from FM-1 (SysEx); with an older firmware it shows what it last sent.
The firmware plays channel 1 on the upper manual, 2 on the lower, 3 on the pedal. Change this only if you changed it in the firmware.